Skip to content
On-Site SRS Airbag Module Reset in Dallas–Fort Worth
After a collision, your airbag control module locks itself and stores the crash — and no scan tool will clear that light. We come to you across DFW and reset the module to its original factory condition, so the light goes out and the system is ready to protect you again.
Your SRS (supplemental restraint system) airbag control module is the small computer that fires your airbags and seat-belt pretensioners in a crash. The instant it deploys them, it writes a permanent ‘crash’ record to its own memory and locks — that’s what keeps the airbag light glowing on your dash afterward.
Here’s the part most people aren’t told: in the vast majority of cases you do not need a brand-new module. We reset yours back to the exact factory condition it left the plant in — crash data and hard codes cleared — for a fraction of what a dealer charges to replace it. We do it right at your vehicle, anywhere in Dallas–Fort Worth.
Reset vs. replace — what your module actually needs
A dealer will often quote you a new module. Usually that’s not necessary. Once the physical airbags and pretensioners are replaced, the control module itself is almost always fine — it’s just holding the crash lock. Clearing that is a reset, not a replacement.
When we reset your module we:
- Clear the stored crash data — the permanent record written at deployment.
- Clear the hard fault codes a scan tool can’t erase.
- Return it to factory condition so it reads as a healthy, ready module.
- Confirm the airbag light is off and the system is armed before we leave.
See it in 60 seconds
Prefer to ship it? Our nationwide mail-in reset ships free both ways. American & Asian vehicles.
How the on-site reset works
- Book and tell us your vehicle. Book online in a couple of minutes and see your firm price as you go.
- We come to you. Our technician meets you at home or work in DFW, removes and resets the module (or resets it in place where possible).
- Light off, you’re done. We confirm the airbag light is out and no codes remain. Backed by our 30-day labor warranty.
Related airbag & safety services
Mail-in module reset →
Not in DFW? Ship us your module — free 2-way shipping, back in 24 business hours.
Why drivers choose us for airbag module work
- 💲 Reset, not replace — A reset back to factory condition instead of a pricey new module — real savings.
- 🚗 We come to you — Mobile across Dallas–Fort Worth. No tow, no dealership wait.
- 🔧 SRS specialists — Airbag modules are what we do every day, to the manufacturer’s standard.
- 🛡️ 30-day labor warranty — If our workmanship isn’t right, we make it right.
Common questions
Do I need a new airbag module or can mine be reset?
In most cases it can be reset. After the airbags and pretensioners are replaced, the control module itself is usually fine — it’s just holding the crash lock. We reset it to factory condition and clear the codes, which is far cheaper than a new module. If a module is physically damaged, we’ll tell you and program a replacement instead.
Will a regular scan tool turn off my airbag light?
No. After a deployment the module stores hard crash codes that a standard scanner can’t erase. It takes a proper reset to clear the crash data and return the module to factory condition.
How much does an on-site airbag module reset cost?
On-site reset is available across DFW. If you’d rather ship the module to us, our nationwide mail-in reset comes with free 2-way shipping.
Is a reset module safe?
Yes. A reset returns the module to the same factory condition it had when the car was new — provided the deployed airbags and pretensioners have been properly replaced, which we can also handle.
What vehicles do you work on?
American and Asian makes and models. Send us your year, make, and model if you’re unsure and we’ll confirm.
Book your service
Tell us your vehicle and what’s going on. Book online in a couple of minutes and see your firm price as you go.
What our customers say
Real Google reviews from LockNCal customers.
Jose has been a great help in diagnosing, troubleshooting, and reprogramming the airbags on my 2016 Mazda Miata. I’ve found his pricing to be very competitive, and his turnaround time is quick. Additionally, working with Jose is convenient since he’s mobile.
Excellent service!! Sent my SRS module from FL to have it checked. The day they received it, they had it fixed and mailed back out the very same evening. When I received it, plugged it in and SRS light on dash gone. Thanks LockNCal, very much appreciated!
The process went very smooth. Took it out broken shipped it away brought it back and all was well. Great job.
Get your airbag light off the right way
Book online in a couple of minutes and see your firm price as you go, or call or text a real technician at (469) 277-7277.