Backup & 360 Camera Calibration in Dallas–Fort Worth
Your reversing camera and surround-view system have to show the guide lines and stitched image exactly where the road actually is. After a tailgate, bumper, or camera repair, those cameras need recalibration so what you see on screen matches reality.

Backup cameras — and the 360-degree surround-view systems that stitch several cameras into one top-down picture — depend on each camera sitting at a known position and angle. The car uses that to overlay accurate parking guide lines and to blend the images together cleanly.
Replace or disturb a camera (a tailgate or liftgate repair, a bumper R&R, a mirror replacement on cars with side cameras, or a windshield job on front-camera systems) and the picture no longer lines up with the real world. Guide lines point at the wrong spot and the 360 view shows seams or ghosting. Calibration re-references each camera so the display is accurate again.
When backup and surround cameras need calibration
You typically need this after:
- A rear camera or tailgate/liftgate replacement or repair.
- Bumper removal or a collision repair that moved a camera.
- A side-mirror replacement on vehicles with mirror-mounted 360 cameras.
- Symptoms: guide lines that don’t match where the car goes, a misaligned or seamed 360 image, or a camera fault message.
$350 per calibration
Final price confirmed by vehicle and system. American & Asian vehicles.
How we calibrate your cameras
- Tell us what was done. Book online and note any tailgate, bumper, mirror, or camera work.
- We recalibrate to spec. We run the manufacturer’s camera calibration with the correct targets so the image and guide lines are accurate.
- We verify and confirm. We check the view lines up and no faults remain. Backed by our 30-day labor warranty.
Related ADAS calibrations
Why choose LockNCal
- 📷 Accurate to OEM spec — Guide lines and the 360 image re-referenced to the manufacturer’s targets.
- 🚗 Mobile or in-shop — We come to you across DFW where the procedure allows.
- 🔧 ADAS specialists — Camera and sensor calibration is core to our daily work.
- 🛡️ 30-day labor warranty — If it’s not right, we make it right.
Common questions
Why does my backup camera need calibration after a tailgate or bumper repair?
The camera’s exact position and angle are what the car uses to draw accurate guide lines and stitch the 360 view. Moving the camera during a repair shifts that reference, so the display no longer matches the real world. Calibration re-references it.
How much does camera calibration cost?
It starts at $350 per calibration. The final price depends on your vehicle and how many cameras are involved. We confirm before starting.
My parking guide lines point the wrong way — is that a calibration issue?
Very likely. Guide lines that don’t match where the car actually goes are a classic sign the camera is out of calibration, usually after a repair. Recalibrating realigns them.
Do you come to me?
For many vehicles, yes — we’re mobile across DFW, with our shop available when a controlled space is needed.
Book your service
Tell us your vehicle and what’s going on. Book online in a couple of minutes and see your starting price as you go.
What our customers say
Real Google reviews from LockNCal customers.
Get your cameras showing the truth again
Book online in a couple of minutes and see your starting price as you go, or call or text (469) 277-7277.
