Clock Spring Replacement Cost in DFW (2026 Price Guide)
Clock spring (spiral cable) replacement starts at $300 in Dallas–Fort Worth. See what the part and labor cost and the symptoms that mean it is time to replace it.
Clock spring (spiral cable) replacement typically costs between $200 and $600. The part runs about $ 30–$300 (OEM toward the higher end), and labor is usually 1–3 hours, which is why national shop averages often land around $500. At LockNCal, mobile clock spring replacement in the Dallas–Fort Worth area starts at $300 for labor, with the part quoted separately (OEM or remanufactured-OEM) and the final price confirmed on-site. Because the clock spring carries the airbag signal through the steering column, a failing one can turn off your driver airbag — so this is a safety-critical fix.
Book clock spring replacement → · Check your VIN free
Clock spring replacement cost at a glance
| Item | Typical cost |
|---|---|
| Part — aftermarket clock spring | $50–$150 |
| Part — OEM clock spring | $150–$300 |
| Labor (1–3 hours) | $120–$450 |
| Typical total (shop) | $200–$600 |
| LockNCal mobile (DFW) | From $300 labor + part (OEM or reman-OEM, quoted separately) |
What is a clock spring, and why does it matter?
The clock spring — also called the spiral cable — is a coiled ribbon of wiring inside the steering column that keeps a constant electrical connection between the steering wheel and the rest of the car while the wheel turns. It carries the signal for your driver airbag, horn, cruise control, and steering-wheel buttons. When it wears or breaks, the airbag circuit can be interrupted — which is why a bad clock spring usually triggers the airbag/SRS warning light and can prevent the airbag from deploying in a crash.
Common signs of a failing clock spring
- Airbag / SRS warning light is on
- Horn works intermittently or not at all
- Cruise control or steering-wheel buttons stop responding
- Clicking or grinding noise when turning the wheel
- Stored SRS fault codes for the driver airbag circuit
What affects the price?
- OEM vs. remanufactured-OEM part. OEM costs more; we’ll tell you which we’re installing before the work.
- Make and model. Steering-column access and part price vary by vehicle.
- Related work. After replacement, a steering angle sensor reset / ADAS calibration is sometimes needed.
- Diagnosis. If you’re not sure the clock spring is the cause, a Vehicle Diagnostic (from $150) confirms it first.
Why choose LockNCal
- Licensed & insured Texas company — mobile across Dallas–Fort Worth
- We come to you; an honest starting price is confirmed before work begins
- OEM or remanufactured-OEM parts (your choice, quoted up front)
- Verification-first workflow and a 30-day labor warranty on workmanship
Related services
- Clock Spring Replacement — full service overview
- Airbag Module Reset Cost
- Airbag Replacement
- Vehicle Diagnostic — from $150
Frequently asked questions
How much does it cost to replace a clock spring?
Clock spring replacement typically costs $200–$600 total — about $50–$300 for the part and 1–3 hours of labor. LockNCal’s mobile DFW service starts at $300 for labor, with the OEM or remanufactured-OEM part quoted separately and the final price confirmed on-site.
Can I drive with a bad clock spring?
It’s risky. A failing clock spring can turn off the driver’s airbag (indicated by the SRS light), so the airbag may not deploy in a crash. It can also knock out your horn and steering controls. It should be replaced promptly.
Will the airbag light go off after the clock spring is replaced?
Usually, yes, once the fault is corrected and the system is verified. If other SRS faults are present, they are addressed as well. We confirm the system status before finishing.
Do you use OEM clock spring parts?
We offer OEM or remanufactured-OEM clock springs and tell you which is being installed, with the part priced separately from labor, before the work begins.
Do you replace clock springs near me in the DFW area?
Yes. LockNCal provides mobile clock spring replacement across Dallas–Fort Worth — we come to your vehicle. Book your service.
What our customers say
Real Google reviews from LockNCal customers.
The website was easy to navigate and I found the service I needed and was able to book the perfect time between work. The technician messaged me a day early letting me know that he would be in the area and gave me the option to get it taken care of early but unfortunately I was working. If I hadn't been that would have been amazing to get it done ahead of time. He was on time and very pleasant. Worked quickly and got my problem taken care of. It was such a better experience than sitting in a waiting room with strangers or having to take an Uber back and forth to avoid such situation. I'm already recommending them to my friends because of how easy it was. Why go to a shop to get your car fixed at the shop can just come to you?
This is my first mobile mechanic experience and I have to say Jose made it the best. He was early on the appointment he was very professional very knowledgeable and polite. If you need a mobile mechanic call lockncal and try to get Jose out he'll fix you right up. I have to admit that I was a little skeptical about paying up front because I've never used this type of service before but the end result I am very pleased and will use this service again thank you Jose again if I need anything else I'll get you out to fix it.
Jose contacted me swiftly after I filled out the form on the website and discussed the part needed (clock spring) and the appointment time. I was able to get in within 2 days. He arrived early and got right to work and was done rather quickly. He communicated well the whole time. I’m very glad to be back on the road and know my airbag light is off and all my steering wheel buttons work again!
On time, reliable and incredible service. Very honest about our repair and showed us the code log. Highly recommend. Already shared his information with a family member who didn’t even know this kind of service exists. Now I can feel confident that our family’s vehicle is safe to drive again.
This is a great company to deal with ,my cruise control stopped working & they came out & gave a free diagnosis which gave a clear picture of what was exactly wrong ,highly recommended ,very professional & honest,thank you again !!!
I initially went to the dealership when the airbag light in my Nissan Rogue had come on. Upon diagnostic review, the dealership advised that it would cost around $4500 to correct the issues that they were seeing with the system. I decided to get a 2nd opinion and I called DFW Safety Restore. Jose was able to work me in next day. He was prompt and right on time for my appointment in coming out to my house to run a diagnostic on my car. The first scan showed a host of issues, the same issues the dealership reported and more. So many, that Jose suggested resetting the codes and rerunning the diagnostic to get a true picture of what was going on. He said if there are true issues with the system the diagnostic codes would reappear. The reset worked and the system went back to normal. I am so thankful for Jose, and DFW Safety Restore for saving me from unnecessary and very expensive work on my car. If you have airbag system issues with your vehicle, I highly, HIGHLY, recommend you give DFW Safety Restore a call first.
Clock spring warning light on?
We replace clock springs on-site across DFW so your airbag and steering controls work again. Book now.